TIBHAR Evolution FX-S
FX-S: high grip PRO top sheet, flexible medium sponge, medium-high speed and maximum spin FX-S is the "little brother" of the EL-S. The FX-S has the enormous spin values of MX-S and the power of the MX-P combined with a newly designed rubber surface. The sponge of the FX-S is softer than the sponge of the EL-S, so that the FX-S in combination with a personalized pimple geometry is more elastic which generates "Flexible Spin". The FX-S is much softer than MX-P and MX-S, but slightly harder than the FX-P. FX-S significantly distinguishes itself from the medium rubbers EL-P and EL-S.
The company writes on the overlays of this series a marking of the form "1.7-1.8 mm, 1.9-2.0 mm, 2.1-2.2 mm", which is not very clear and does not fit into the mechanism of our site. Therefore, we rounded it down to the usual 1.8 mm, 2.0 mm and 2.2 mm. Somewhere on other sites it can be rounded in the other direction, but they are one and the same. For example, if somewhere 2.1 mm is indicated, and we have 2.2 mm, this is the same overlay, because they don't have separate thicknesses of 2.1 and 2.2 mm (and so on).
| Speed type: | OFF | |
| Rubber type: | inverted, tensor | |
| Surface type: | inverted | |
| Sponge type: | normal | |
| Speed: | 9.25 | |
| Spin: | 8.75 | |
| Control: | 4.5 |
Алексей, в чем разница этой от FX-P? Спасибо!
Уже разобрался, тут все доходчиво: https://www.tt-shop.com/com_eng/table-tennis-rubbers/tibhar-rubbers/tibhar-evolution-rubbers.html
Уже разобрался, тут все доходчиво: https://www.tt-shop.com/com_eng/table-tennis-rubbers/tibhar-rubbers/tibhar-evolution-rubbers.html
Написано доходчиво, насчет прочих кроме MX-P и MX-S я их не сравнивал, а эти две сравнивал в деталях и по-моему то что там написано не очень совпадает с результатами моего сравнения, с которым можно ознакомиться здесь https://youtu.be/lGrUKNycDyM
Еще чуть такой инфы:
A simple blind press test revealed the following order of hardness (from firmest to softest): MX-S ? EL-S > MX-P > EL-P ? FX-S > FX-P. The topsheet of the S-series rubbers feels harder than that of the P-series. Tibhar provides quite a bit of information about the rubbers on the back of the cardboard packaging. For example, the hardness of the rubbers is provided: MX-S (~47.3 °), MX-P (~46.7 °), EL-S (~44.8 °), EL-P (~43.4 °), FX-S (~42.0 °), and FX-P (~40.1 °).
